English
简体中文
Русский язык
Français
日本語
한국어
Português
Español
Website navigation
Position:
Leave A Message
E-mail:
Tell:
Whatapp:
Address:Room 1505, Building 9, No. 26 Dongqing Street, Zhengzhou High-tech Industrial Development Zone
Tel Number
180-3717-8440
Introduction
The KJ-MY1700 is a bell-type, hydraulically lifted furnace designed for one-process binder removal (debinding) and sintering of ceramic and powder-metallurgy parts. The furnace body stays fixed while the material table rises hydraulically from below, acting as both hearth and door for smooth, vibration-free loading. A dedicated exhaust blower and duct strip binder vapors out during the low-temperature debinding hold, while MoSi₂ heating rods bring the chamber to 1700 °C for final sintering.
The hot zone is lined with high-purity alumina fiber for uniform temperature, and the double-shell carbon-steel cabinet with forced air cooling keeps the exterior near room temperature. An LCD touch screen provides PID, multi-segment programmable control at ±1 °C, with inert-gas atmosphere and vacuum options.
Applications
1. Ceramic debinding and sintering — electronic ceramics, structural ceramics, and ceramic matrix composites
2. Powder metallurgy / MIM parts — binder removal and sintering of metal-injection-molded components
3. Magnetic and rare-earth materials — sintering of ferrite, NdFeB, and rare-earth permanent-magnet parts
4. Cemented carbide and cutting tools — high-temperature sintering under controlled atmosphere
5. Precious-metal and catalyst support processing
6. Battery-material and advanced ceramic R&D — programmable ramp/soak cycles for recipe development
