KJ-R1000-280IC Rotary tube furnace is a high temperature reactor with special rotary and tilt function. It is specially designed for sintering of inorganic compound, such as, mineral particles and battery material and with better uniformity.
|Furnace door||Electric open type|
|Max. working Temperature||800℃|
|Heating Rate||Max. 0-20℃/min, Suggestion 0~10℃/min|
|Temperature Zone||300+300+300+300 +300mm
5 hot zones, total 1500mm
|Temperature Control Accuracy||±1℃|
|Tube Diameter||Ф280 mm OD|
|Tube Material||316L Stainless steel|
|Tube sealing||-Stainless steel flange with feeding system
-Automatic feeder(50L) is installed on the flange.
-A stainless steel receiving tank(50L) is installed at the discharging end, which can collect the processed materials.
-The feeder and collector material also 316L
|Heating Element||SiC rods|
|Tube Rotating Speed||0-10 RPM|
|Furnace Tilt Angle||0~5℃|
|Thermocouple||K Type x 5 pcs|
|Tube Function||Rotating and tilt function.|
|Max. Power||According to design|
|Working Voltage||AC 415V, 3 phases, 50Hz (or according to your requirement)|
|Temperature Control||-5 sets temperature controller
-PID automatic control via SCR power control
-30 steps programmable
|Chamber material||Alumina Fiber|
|Warranty||One year limited warranty (Consumable parts such as heating elements and mulite tube are not covered by the warranty)|
Please leave a message here. We will reply you in 24 hours.
Wechat/Whatsapp: +86 18037178440
Company Tell: +(86)18137195600