Position:Home > Products > Tube Furnace > Multi-Zone Tube Furnace > 4-6 zones Tube Furnaces
[!--oldtitle--]
  • 1200℃ Four Zones Split Tube Furnace

    Model:KJ-1200X-IV-S

    Continuous Temp:

    Chamber/Tube size:

    Description:

    Specific Introduction:
        KJ-1200X-IV-S is the smallest 1100oC Four- Zone split tube furnace with separate temperature control console. Such a four zone furnace can create step thermal gradient or uniform temperature zone up to 10" long by adjusting four zones' temperature. The furnace can accept 1" OD processing tube  (with min. 1000mmL). Four 30 segments temperature controllers are built in a separate unit which enables easy program input. It is an excellent furnace for various CVD, PVD applications.

    Parameters:
    Furnace structure Double layer steel case with air cooling keeps furnace surface temperaturelower than 60°C.  
    Energy saving high purity fibrous alumina insulation.
    Heating Element: 1300C  grade Fe-Cr-Al Alloy doped by Mo
    400mm long heating chamber with built-in four high-quality thermal couples. 
    Furnace heating module can be positioned horizontally or vertically as shown in the images below (Note: customers is responsible for DIY the support frame/bracket in order to maintain its vertical position)

    Power & Voltage  
    AC 110V Single Phase, 50/60 Hz (Click to order a 5000W transformer when using AC220V).
    3 KW Max.  (a 32A circuit breaker is installed)
    Powder cord is included without plug 
    (Note: For the 110VAC version, must use circuit breaker rated for 30Amps or higher. Never plug the equipment into a commercial 110V wall outlet which is only rated for 15~20amps )
    Max. Temperature 1100oC (<1 Hour)
    Continuous Working Temperature 1000oC
    Max. Heating Rate ≤ 20oC /min


    Heating Zones
    Four heating zones with independent temperature control
    Each heating zone length  100 mm
    Total heating zone length: 400 mm (15.75" in total)
    Max. Constant temperature zone length 250mm, +/- 1°C (if 4 zones are heated to the same temperature)
    Note: Max. the achievable temperature difference between adjacent zones is 200°C.




    Temperature Controllers
    • PID automatic control with 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
    • Built-in overheating & broken thermocouple protection.
    • Over temperature protection and alarm allows for operation without attendant(s).
    • +/- 1ºC temperature accuracy.
    • Four K-type thermocouples (one for each zone).
    • RS485 Communications Port.
    Optional:  The furnace can be operated by PC with Temperature control software package (includes four communication chips and one 15" laptop).

    Optional Processing Tube &
    Vacuum flange
    (Optional)
    The furnace can accommodate <= 1" Dia. x 40" long quartz tube with 1" vacuum flanges and thermal blocks. These accessories are not included in the standard package
    Product Dimensions
    • Furnace:540mm (L) x 410mm (W) x 330mm (H)
    • Control box: 560mm (L)x 380mm (W)x 260mm (H)
    Net Weight About 45 Kg
    Warranty One-year limited warranty (Consumable parts such as processing tubes, o-rings are not covered by the warranty)


    Compliance
    CE Certified
    All electric components ( >24V) are UL / MET / CSA certified
    The furnace is ready to pass NRTL (UL61010) or CSA certification at extra cost. 

    Operation Instruction
    Warning:
    • The tube furnaces with quartz/mullite tube are designed for using under vacuum and low pressure <0.2 bars / 3 psi / 0.02 MPa
    • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. 
    • * Vacuum pressures may only be safely used up to 1000°C  
    Products
    Inquiry

    Tel Number

    181-3719-5600

    Email

    web@kejiafurnace.com

    FaceBook

    Zhengzhou/Kejia

    YouTuBe

    Zhengzhou/Kejia

    kejialiuyan