English
简体中文
Русский язык
Français
日本語
한국어
Português
Español
Website navigation
Position:
Leave A Message
E-mail:
Tell:
Whatapp:
Address:Room 1505, Building 9, No. 26 Dongqing Street, Zhengzhou High-tech Industrial Development Zone
Tel Number
180-3717-8440
Introduction:
This custom-made tube furnace has a box-type furnace structure for gas insulation, heated by resistance wires, and the tube furnace above is heated by silicon carbide rods, which is specially made for materials that require special heat treatment processes.
This customized tube furnace, the tube furnace is heated by silicon carbon rods, the maximum temperature is 1400, the tube diameter is 80mm, the heating area is 400mm, with a gas holding furnace, the box furnace structure for gas insulation, heating with resistance wire, according to The maximum temperature is 1000 degrees, the two furnace bodies are detachable, touch screen operation, vacuum ventilation is required, the vacuum degree can reach 20pa, with a water-cooled collection tank, the double-layer water-cooled collection tank is made of 316L material, and there is a vacuum pump port on the side of the collection tank. Gas ports and valves, double-layer sieve plates are welded at the interface of the vacuum pump. The sieve plates whose mesh number is less than 400 mesh can be disassembled and cleaned to prevent material reduction due to vacuuming.
Technical parameters:
This custom-made tube furnace has a box-type furnace structure for gas insulation, heated by resistance wires, and the tube furnace above is heated by silicon carbide rods, which is specially made for materials that require special heat treatment processes.
This customized tube furnace, the tube furnace is heated by silicon carbon rods, the maximum temperature is 1400, the tube diameter is 80mm, the heating area is 400mm, with a gas holding furnace, the box furnace structure for gas insulation, heating with resistance wire, according to The maximum temperature is 1000 degrees, the two furnace bodies are detachable, touch screen operation, vacuum ventilation is required, the vacuum degree can reach 20pa, with a water-cooled collection tank, the double-layer water-cooled collection tank is made of 316L material, and there is a vacuum pump port on the side of the collection tank. Gas ports and valves, double-layer sieve plates are welded at the interface of the vacuum pump. The sieve plates whose mesh number is less than 400 mesh can be disassembled and cleaned to prevent material reduction due to vacuuming.
| Product Name | Customized modular tube furnace |
| Model | KJ-T1400-L80-SJ |
| Max.Temperature | 1400℃ |
| Working temperature | ≤1300℃ |
| Controller | Touch screen operation |
| Cabinet color | Standard |
| Furnace tube size | Pipe diameter 80mm, heating zone 400mm (Customization is available upon request.) |
| Heating element | Silicon carbide rod, resistance wire |
| Heating rate | 10℃/min |
| Thermocouple | S type and N type |
