English
简体中文
Français
日本語
한국어
Português
Русский
Español
Website navigation
Position:
E-mail:
Tell:
Whatapp:
Address:No.18 Hongye Road,Hi-tech zone,Zhengzhou,China,450000
Tel Number
181-3719-5600
Specific Introduction:
KJ-1200X-80SL is a CE certified & UL Ready slideable tube furnace with 3" IDx55" L Quartz tube and flanges and a maximum working temperature up to 1200°C. One pair of sliding rail is installed on the bottom of the furnace to allow sliding the furnace from one side to another to achieve max. heating and cooling rates up to 100°C/min. For fastest heating, the furnace may be pre-heated to the desired temperature and then be slide to the sample's position. As for fastest cooling, the furnace can be slide to another side after sample heating is completed. Moreover, the heating and cooling rates may reach 15°C/s under vacuum or inert gasses. This furnace provides an alternative for rapid thermal processing at the lowest cost.
Parameters:
KJ-1200X-80SL is a CE certified & UL Ready slideable tube furnace with 3" IDx55" L Quartz tube and flanges and a maximum working temperature up to 1200°C. One pair of sliding rail is installed on the bottom of the furnace to allow sliding the furnace from one side to another to achieve max. heating and cooling rates up to 100°C/min. For fastest heating, the furnace may be pre-heated to the desired temperature and then be slide to the sample's position. As for fastest cooling, the furnace can be slide to another side after sample heating is completed. Moreover, the heating and cooling rates may reach 15°C/s under vacuum or inert gasses. This furnace provides an alternative for rapid thermal processing at the lowest cost.
Parameters:
| Furnace Structure |
|
|
| Power | 2.5KW | |
| Voltage | AC 208-240V Single Phase, 50/60 Hz | |
| Max. Temperature | 1200°C (<1 hour) | |
| Continuous Temperature | 1100°C | |
| Heating& Cooling Rates |
|
|
| Heating Zone Length | 440mm ( single zone ) | |
| Constant Temperature Zone | 120mm (+/-1°C @ 400-1200°C) | |
| Heating Elements | Fe-Cr-Al Alloy doped by Mo | |
| Processing Tube Size |
High purity fused quartz tube O.D. : 3.2" (80 mm) I.D. : 3.0" (75 mm) Length: 55" (1400 mm) Two foam ceramic blocks are included which must be placed inside tube to avoid heat radiation damaging O-ring |
|
| Temperature Controller |
|
|
| Temperature Accuracy | +/ - 1°C | |
| Vacuum Flanges |
|
|
| Vacuum Level |
|
|
| Sliding Rails / Table |
Double sliding rail made by Cr-plated steel Sliding length: 1200 mm One slide stopping clamp is included for holding the position of the furnace. |
|
| Dimensions |
550 x 380 x 520 mm ( furnace only) 1500 x 380 x 620 mm ( furnace + sliding ) |
|
| Net Weight | ~ 100 Kg | |
| Shipping Package Size | 60" x 40" x 45" (inch) | |
| Shipping Weight | 305 lbs | |
| Warranty | One year limited manufacturer's warranty (Consumable parts such as processing tubes, O-rings and heating elements are not covered by the warranty, please order replacements at related products page). |
