English
简体中文
Русский язык
Français
日本語
한국어
Português
Español
Website navigation
Position:
Leave A Message
E-mail:
Tell:
Whatapp:
Address:Room 1505, Building 9, No. 26 Dongqing Street, Zhengzhou High-tech Industrial Development Zone
Tel Number
180-3717-8440
The KJ-T1100-LZ-1R tube vacuum furnace is based on the original tube furnace, adding a vacuum system to enable customers to obtain a highly clean chamber, providing a clean and impurity-free high vacuum state, uniform heating temperature and accurate control, especially suitable for semiconductor devices or other Annealing process for materials with high environmental requirements, excellent workpiece quality and high yield.
Product Description:
Features：
●Beautiful appearance, small footprint
●Using high-precision, multi-function temperature controller, it can automatically adjust and modify PID parameters, store temperature control curve and can modify, delete and reset at any time, simple and convenient operation
●With multiple fault display, alarm and interlock protection functions
●The furnace body can be moved, pushed and pulled to accelerate the cooling of the low temperature section
Technical index：
●Applicable process sheet size: 2~8 inch round or square sheet
●Common working temperature: 400～1000℃
●Length and accuracy of constant temperature zone: ≤±0.5℃/400~800mm (600~1000℃);
≤±1℃/400~800mm (300~600℃)
●Maximum heating rate: 10℃/min
●Ultimate vacuum: ≤5×10-3Pa;
●Pneumatic system: oxygen, nitrogen, argon;
Scope of application：
Used in ceramic circuits, sensor sintering and annealing treatment, permanent magnet alloy manufacturing, vacuum brazing, vacuum degassing, and non-oxidation bright heat treatment of metal materials.
Product Description:
Features：
●Beautiful appearance, small footprint
●Using high-precision, multi-function temperature controller, it can automatically adjust and modify PID parameters, store temperature control curve and can modify, delete and reset at any time, simple and convenient operation
●With multiple fault display, alarm and interlock protection functions
●The furnace body can be moved, pushed and pulled to accelerate the cooling of the low temperature section
Technical index：
●Applicable process sheet size: 2~8 inch round or square sheet
●Common working temperature: 400～1000℃
●Length and accuracy of constant temperature zone: ≤±0.5℃/400~800mm (600~1000℃);
≤±1℃/400~800mm (300~600℃)
●Maximum heating rate: 10℃/min
●Ultimate vacuum: ≤5×10-3Pa;
●Pneumatic system: oxygen, nitrogen, argon;
Scope of application：
Used in ceramic circuits, sensor sintering and annealing treatment, permanent magnet alloy manufacturing, vacuum brazing, vacuum degassing, and non-oxidation bright heat treatment of metal materials.
