Lab Scale Elastomeric Material Pyrolysis Tube Furnace with Hopper and Impingers

Model：KJ-1200T

Description：

Lab Scale Elastomeric Material Pyrolysis Furnace with Hopper and Impingers is a high temperature reactor with special rotary and tilt function. It is specially designed for sintering of inorganic compound, such as, mineral particles and battery material a

Introduction:
Lab Scale Elastomeric Material Pyrolysis Furnace with Hopper and Impingers is a high temperature reactor with special rotary and tilt function. It is specially designed for sintering of inorganic compound, such as, mineral particles and battery material and with better uniformity. Multi heating zone, condenser and tail gas collect equipment can be optional part according to different experiment.

Technical Parameter:

Model	KJ-1200T
Display	LCD Touch Screen It can storage temp. Time, pressure value and support to output values with USB disk.
Working Temperature	≤1000℃
Heating Rate	Suggestion 0~10℃/min
Temperature Zone	300+400+300 mm 3 hot zones
Temp. Control Thermocouple	3pcs* K type thermocouple for each zone outside furnace tube
Monitoring thermocouple	1 piece K type in the middle of hot zone inside furnace tube and the temp. will read and display on the LCD touch screen of furnace. But this thermocouple is for monitoring temp. Only, can’t control temp.
Temperature Control Accuracy	±1℃
Tube Diameter	Ф70mm OD
Tube Material	Stainless Steel Tube
Tube sealing	The two ends of tube is with flange sealing. And there is gas inlet/outlet on the flange. One side of tube is with feeder (apprx. 6L)
Tube sealing	The other side is with container (silo)
Max. Vacuum Level	20mbar
Vacuum Pump	4L/S rotary vane vacuum pump
Digital Vacuum Gauge	measuring range is: 3.8*10^-5 to 1125 torr
Mass Flow Meter	Flow range: to 1.6SLM for N2 LCD Touch Screen
Heating Element	Resistance wire with Mo
Tube Rotating Speed	0-10 RPM
Thermocouple	K Type x 3 pcs
Tube Function	Rotating and tilt function.
Max. Power	12 KW
Working Voltage	AC 380V 3 phases, 50Hz
Temperature Control	3 sets PID automatic control via SCR power control
Heating curves	30 steps programmable
Chamber material	Alumina Fiber
Release Relief Valve	Relief automatically at 0.02Mpa
Heating Ribbon and temp. Controller Up to 300C	On outlet side tube
Mechnical Pressure Gauge in inlet Measuring range: -0.1 to 0.15Mpa	On inlet side tube
Warranty	One year limited warranty (Consumable parts such as heating elements are not covered by the warranty)