Position:Home > Products > Tube Furnace > Rotatory Tube Furnace
[!--oldtitle--]
  • 1600℃ Inclined Rotating Tube Furnace

    Model:KJ-T1600-L5015-SWQ

    Continuous Temp:

    Chamber/Tube size:

    Description:

    Product introduction:
        The 1600℃ inclined rotary tube furnace is a CE-certified inclined rotary tube furnace with 1600℃ three temperature zones. It is designed for uniform sintering of powder at high temperature; each temperature zone consists of three An independent temperature control system is individually controlled. By adjusting the temperature of each temperature zone, a temperature gradient can be formed in the heating zone or a longer constant temperature zone can be formed. Each temperature control system is adjusted in PID mode, and 30 sections of temperature rise and fall programs can be set, and the B-type thermocouple is used for temperature measurement and control, and its temperature control accuracy can reach +/- 1℃.

    Technical Parameter:

    product name

    1600℃ Three Temperature Zone Inclined Rotating Tube Furnace

    Product number

    KJ-T1600-L5015-SWQ

    Shell structure

    Double shell with air cooling system

    Furnace material

    Furnace uses alumina polycrystalline fiber

    Furnace tube size approximately

    Φ50×1500mm

    Heating zone

    Three temperature zone heating, each temperature zone 220mm

    Furnace tube material

    Corundum furnace tube

    Operating temperature

    1500°C

    Maximum temperature

    1600°C

    Temperature control method

    Three temperature zones independently control temperature, each zone can realize intelligent 30-segment PID programmable control, with over-temperature and burnout protection functions

    Flange joint

    Equipped with two stainless steel vacuum flanges, mechanical pressure gauge has been installed

    Sealing system

    The furnace tube and flange are extruded and sealed with a silicone O-ring, which is easy to disassemble and reassemble, and has good air tightness. Vacuum and atmosphere can be evacuated during rotation.

    Heating rate

    0-10℃/min

    Heating element

    Silicon molybdenum rod

    Operating Voltage

    AC 220/380V 50Hz 

    Maximum power approx.

    10KW

    Temperature measuring element

    3 B-type thermocouples, independent temperature control

    Vacuum

    Pre-evacuated to -0.1MPa (value of vacuum pressure gauge)

    Accessible atmosphere

    Inert gas (slightly positive pressure)

    Provide related accessories

    Crucible tongs, high temperature gloves, thermocouple, furnace plug, manual, warranty card, etc.

    After-sales service

    12-month warranty and lifetime warranty (except vulnerable parts)

     
    Products
    Inquiry

    Tel Number

    181-3719-5600

    Email

    web@kejiafurnace.com

    FaceBook

    Zhengzhou/Kejia

    YouTuBe

    Zhengzhou/Kejia

    kejialiuyan