English
简体中文
Русский язык
Français
日本語
한국어
Português
Español
Website navigation
Position:
Leave A Message
E-mail:
Tell:
Whatapp:
Address:Room 1505, Building 9, No. 26 Dongqing Street, Zhengzhou High-tech Industrial Development Zone
Tel Number
180-3717-8440
Brief Introduction
It is suitable for the sintering of electronic ceramic and high temperature structural ceramics, precision annealing and crystallizing of glass, precision annealing of crystal, the preparation of ceramic glaze, the sintering of nanometer material, metal parts and other heat treat process. It is an ideal experiment and production equipment for research institute, university, industrial and mining enterprises.
Features
1.Maximum energy efficiency is achieved by surrounding chamber thermal-efficient alumina fiber ceramic insulation.
2.Heavy duty double layer structure with cooling fan. Lower teperature in outside case.
3.PID automatic control via current limiting phase angle fired the resistor, e.g. SCR(Silicon Controlled Rectifier).
4.Power control with 30 segments programmable.
Technical Parameter
It is suitable for the sintering of electronic ceramic and high temperature structural ceramics, precision annealing and crystallizing of glass, precision annealing of crystal, the preparation of ceramic glaze, the sintering of nanometer material, metal parts and other heat treat process. It is an ideal experiment and production equipment for research institute, university, industrial and mining enterprises.
Features
1.Maximum energy efficiency is achieved by surrounding chamber thermal-efficient alumina fiber ceramic insulation.
2.Heavy duty double layer structure with cooling fan. Lower teperature in outside case.
3.PID automatic control via current limiting phase angle fired the resistor, e.g. SCR(Silicon Controlled Rectifier).
4.Power control with 30 segments programmable.
Technical Parameter
| 1 | Model | PT-V1600 |
| 2 | Furnace structure | Double-layer shell, water cooling between the inner and outer walls, ensure the furnace surface temperature is ＜55℃ |
| 3 | Furnace shell material | Carbon steel |
| 4 | Chamber size | 250x250x300mm |
| 5 | Continuous working temperature | ≤1500℃ |
| 6 | Max. Working temperature |
1600℃ |
| 7 | Heating element | MoSi2 rods(Silicon molybdenum rods) |
| 8 | Chamber material | Alumina polycrystalline fibre |
| 9 | Heating rate | Suggestion: 0~10℃/min (max. 20℃/min) |
| 10 |
Temperature control |
-PID automatic control via SCR (Silicon Controlled Rectifier) power control; -30 programmable segments for precise control of heating rate, cooling rate and dwell time; -Built-in over temperature alarm and protection allows for operation without an attendant; - +/- 1 ºC temperature control accuracy. |
| 11 | Thermal couple | B type |
| 12 | Rated power | 8.0KW |
| 13 | Working voltage | 110-480V; 50/60HZ |
| 14 | Limit Vacuum Degree | 10Pa |
| 15 | Vacuum pump | Rotary vane vacuum pump system |
| 16 | Vacuum gauge | Compound digital vacuum gauge |
| 17 | Protective atmosphere | Furnace with gas inlet and outlet valves, can pass over Nitrogen, Argon and other protective gas. |
| 18 | Cooling system | Water chiller cooling system |
| 19 | Warranty | One year(exclusive wearing part) |
