Main Features |
-
Max. Working Temperatures to 1000°C
-
The highest quality Kanthal heating wire and Omega thermal couple
-
Automatic feed loading and product unloading
-
A large touch screen temperature controller provides individual temperature programming for the seven heating zones
-
Dual thermocouple temperature monitoring & control mechanism
-
Easy to install the three modules
|
Furnace structure |
-
Total of seven heating modules.
-
High purity fibrous alumina insulating systems between each module for the max energy saving
-
Dual-layer insulation design ensures a casing surface temperature < 70C
-
300mm Long cooling section is integrated at the end section of the furnace
-
Mesh type belt is supported in the furnace by a series of quartz supports.
|
Power |
-
AC 208-240V Three Phase, 50/60 Hz,
-
Current: ~50A for each phase.
-
19 KW Max. (~3KW for each zone)
-
The power cord is included without a plug.
|
Temperature Control |
-
Independent temperature control unit, which allows a remote operation
-
Touch Screen Controller allows individual temperature control for the seven zones
-
Max. Working Temperature: 1050°C
-
Continuous Working Temperature: 900°C
-
The heating Rate is up to 10℃/min
-
15 pcs K Type Thermocouples are installed ( 7 T/C for control and 8 T/C for the monitor )
-
Temp. Control Accuracy: +/-1℃
|
Heating Zone |
-
Seven independent heating zones, each heating zone length 300 mm ( 11.8")
-
Total zone length: 2100 mm ( 82.7'' )
-
Heating Zone width: 8" ( 200 mm )
|
Max. Sample Size allowed |
6'' W x 1'' H |
Conveyor Belt and Main Entrance |
-
Mesh type conveyor belt, 130mm Wide X10 mm Thick X 6200mm Long
-
6'' Wide x 2" Height Entrance (Can be increased to 12'' Wide upon request)
-
Conveyor Speed: 10 - 100 mm/second variable
|
Furnace Dimension |
Furnace: 3200mm L X 700mm W X 1500mm H
Power Supply: 1000mm L X 600mm W X 800mm H |
Warranty |
One year limited warranty for electrical parts. (Consumable parts such as processing tubes, O-rings, and heating elements are not covered by the warranty, please order the replacement at related products page.) |
Compliance |
-
CE Certified
-
NRTL / CSA Certification is available upon request, additional charges will apply
|
Application Notes
|
-
Metal and ceramic sintering
-
The thick film firing process
-
Fast drying and curing
-
Calcination
-
Carbonization
-
Gas-solid reaction
-
Purification
-
Metallization process of solar cell fabrication
-
Customizations Available:
-
Heating models are modulized, 300mm ~2100mm L is available upon request.
-
Heating zone width can be increased up to 12''
|