Company Statement" Zhengzhou KJ Technology Co., Ltd. " belongs to the international business department of KJ Group. Starting today, the company will continue the international business contract signed or currently being performed by " Zhengzhou Kejia Furnace Co., Ltd. " See details >>
|Product||Single-zone Mini Chemical Vapor Deposition CVD System With Float Flow Meters|
|Insulation layer||Alumina ceramic fiber|
|Temperature Control Accuracy||+/- 1℃|
|Temperature Control||Intellectual 30-segment programmable controller with over-temperature protection|
|Sealing||Customizable flanges with gas valves, pressure gauge and so on.|
|Gas Supplying Unit||Adjustable float flow meters
No need for electricity
|Vacuum Pump Unit||10pa Vacuum pump with dust filter
Digital pressure gauge
|Heating Rate||0-20℃/min (Suggestion: 0-10℃/min)|
|Heating Element||0Cr27Al7Mo2 resistance wire|
|Power supply||AC220V, 50Hz (Customizable)|
|Temperature Sensor||K-type Thermocouple|
|Accessories||Crucibles, Crucible Tongs, Gloves, Insulation blocks.|
|Notes||Pressure higher than 1.02Mpa will break the tube.
Since the pressure in the gas cylinder is high, a converter is necessary. The measurement range of our converter is 0.01mpa-0.1mpa, will ensure a safe gas supply.
No vacuum condition is allowed when the temperature is higher than 1000℃.
Please keep the gas flow lower than 200sccm when the temperature is high to lower the impact of cold air to the hot tube.
If you have to keep the valves on the two ends of the tube closed at the same time, please watch the pressure gauge and open the valves once the pressure is higher than 1.02Mpa to avoid any tube breakage.
|After-sale Service||1-year warranty and life-time technical support|
Please leave a message here. We will reply you in 24 hours.
Wechat/Whatsapp: +86 18037178440
Company Tell: +(86)18137195600