Position:Home > Products > CVD/PECVD System > CVD Furnace System
1200℃ Mini Gas-Mixing Chemical Vapor Deposition CVD System
  • 1200℃ Mini Gas-Mixing Chemical Vapor Deposition CVD System
  • 1200℃ Mini Gas-Mixing Chemical Vapor Deposition CVD System
  • 1200℃ Mini Gas-Mixing Chemical Vapor Deposition CVD System
  • 1200℃ Mini Gas-Mixing Chemical Vapor Deposition CVD System
  • 1200℃ Mini Gas-Mixing Chemical Vapor Deposition CVD System

    Model:KJ-T1200-S5020-IC

    Description:

    1200℃ Mini Gas-Mixing CVD system comprise of a mini Tube Furnace, a two-channel gas-mixing unit with mass flow meters, a vacuum pump unit of 10Pa.

    Range of Application:
        It’s mainly used in research of graphene, materials for lithium battery, annealing of crystal, luminescent materials and so on.

    Parameters:

    Product

    1200℃ Mini Gas-Mixing Chemical Vapor Deposition CVD System

    Model

    KJ-T1200-S5020-IC

    Insulation layer

    Alumina ceramic fiber

    Tube

    Quartz, Φ50*800mm.

    Heating Zone

    200mm

    Top Temperature

    1200℃

    Working Temperature

    1100℃

    Temperature Control Accuracy

    +/- 1℃

    Temperature Control

    Intellectual 30-segment programmable controller with over-temperature protection

    (Touchscreen controller is available.)

    Sealing

    Customizable flanges with gas valves, pressure gauge and so on.

    Gas Mixing Unit

    Ar, H2, N2 and so on are available.

    Mass Flow meters

    Flowing rate accuracy: ±1% FS

    Vacuum Pump Unit

    Vacuum pump with dust filter

    Digital pressure gauge

    Heating Rate

    0-20℃/min (Suggestion: 0-10℃/min)

    Heating Element

    0Cr27Al7Mo2 resistance wire

    Power supply

    AC220V, 50Hz (Customizable)

    Power

    2kW

    Temperature Sensor

    K-type Thermocouple

    Accessories

    Crucibles, Crucible Tongs, Gloves, Insulation blocks.

    Notes

    Pressure higher than 1.02Mpa will break the tube.

    Since the pressure in the gas cylinder is high, a converter is necessary. The measurement range of our converter is 0.01mpa-0.1mpa, will ensure a safe gas supply.

    No vacuum condition is allowed when the temperature is higher than 1000℃.

    Please keep the gas flow lower than 200sccm when the temperature is high to lower the impact of cold air to the hot tube.

    If you have to keep the valves on the two ends of the tube closed at the same time, please watch the pressure gauge and open the valves once the pressure is higher than 1.02Mpa to avoid any tube breakage.

    Certificate

    CE, ISO.

    After-sale Service

    1-year warranty and life-time technical support

    Products
    Inquiry

    Tel Number

    181-3719-5600

    Email

    web@kejiafurnace.com

    FaceBook

    Zhengzhou/Kejia

    YouTuBe

    Zhengzhou/Kejia

    kejialiuyan